Lithium disilicate has definitely taken the dental profession by storm–and Ivoclar to new heights of profitability. The company that released Empress to us so many years ago, and saw it proliferated by every manufacturer who could deconstruct it, was much more careful to guard their product when Empress II, the original name of the lithium disilicate that we know today as e.max, was introduced. It has also been named Empress Eris in the past.
Đang xem: Best cement for emax crowns
I love this stuff. Lithium disilicate has made it possible for us to have an all-ceramic crown material that actually works reliably in almost every situation. While it originally was less-than-perfect for many esthetic applications, the technical modifications that have been made over the past few years have given us a material that can be used with esthetic confidence in both posterior and anterior teeth. The one remaining application in which it struggles to fully displace other materials is in situations where a very thin occlusal thickness is required, such as second molars in cases where a cant is being corrected. Fortunately,zirconia has appeared to fill that need, although I’ve seen some unusual esthetic results in cases that are not a bright and light shade. That being said, pretty much everyone I know in dentistryis using e.max lithium disilicate in their practice.
I get to spend some time at our Anterior Restorative Dentistry workshop discussing the history and current science around bonding. In that regard, there is one question that never fails to come up quicklyand often in that workshop and in othersas well: “Should I seat all of my e-max restorations by bonding them in?”
Before we investigate that, let’s limit our conversation to lithium disilicate since that isthe material for which the question is asked. There are two e.max products that are lithium disilicate: e.max Press and e.max CAD.
Full contour, can be cut back for stacking, can be pressed as a core for stacking with e.max Ceram.
Milled, conditioned, can be cut back for stacking with e.max Ceram.
e.max ZirPress, e.max Ceram, and e.max ZirCAD all share the e.max name, but they are not lithium disilicate.
Fluorapetite glass ceramic ingot that can be pressed over a ZirCAD framework.It can then be cut back for stacking with e.max Ceram. That’s threekinds of e.max in one restoration.
Nano-fluorapetite layering ceramic powder that can be applied over any of the e.max materials.
Yttrium stabilized zirconium oxide block that is milled and then sintered. The milled ZirCAD is 20 percentlarger than the resulting sintered product. It can then be covered with e.max ZirPress and/or e.max Ceram.
If you find all of this confusing, you are not alone. How many of us can name all of the ingredients in all of the e.max products? For the record, it’s the Yttrium stabilizer that most people forget.
Sonow that we are crystal clear, we can discuss the question at hand: Should I cement or bond my e.max (lithium disilicate) restorations?
First of all, can we all agree thatallpartial coverage e.max restorations will bebonded?Partial coverage restorations require a connection to the tooth to have adequate strength. Crowns are where the option appears and the questions begin.
Ifthere is a difference in strength between the two methods of connecting to the tooth, I am betting most of us would opt for more strength, yes? When Bob Winterand I visited Ivoclar”s U.S. headquarters a few years ago, they showed us some impressive data regarding strength. They also showed us some very loud tests that they use for measuring that strength. Bonded on e.max lithium disilicate restorations tested stronger. Case closed?
Just because you can make something stronger, does it mean you have to? My favorite analogy is hanging up a picture. I’m betting that your art is not falling off the walls, and yet youcouldput more nails there to make it stronger. Sometimes enough is good enough. Ifthe strength is adequate for what the restoration will be asked to do, is it necessary to give it more strength? My answer is:if you want to.
I believe, and we teach thishere at Spear, that lithium disilicate crowns can be cemented or bonded. Your decision on which to do is driven by the preparation and the patient. In the case of short prep, too much taper, get the help of adhesive materials to attach it.
A bruxing patient who has destroyed all of your excellent dentistry in the past: same thought.
Adequate resistance and retention form, a patient who only eats and talks with his teeth: cement it if you want to.
I’ve referenced a couple of fairly recent articles that show us one nailcananddoeskeep the art on the wall. In Vivo use of cementation does not change the predictability of the lithium disilicate restoration.
Relish the freedom to do what feels right at the time and what works best in your hands.
Clin Oral Investig. 2013 Jan;17(1):275-84. doi: 10.1007/s00784-012-0700-x. Epub 2012 Mar 7.Clinical results of lithium-disilicate crowns after up to 9 years of service. Gehrt M1, Wolfart S, Rafai N, Reich S, Edelhoff D.J Am Dent Assoc. 2012 Mar;143(3):234-40.Ten-year outcome of three-unit fixed dental prostheses made from monolithic lithium disilicate ceramic.Kern M1, Sasse M, Wolfart S